User Manual

User's Guide ______________________________________________________________________
206 _________________________________________________________________ M210933EN-C
Common Modem Parameters
All different IP-modem types share the same configuration view:
Device configurations, shown in Figure 88 on page 206. This section
describes the parameters for basic use. For advanced modem
configuration, refer to section Generic IP Modem Configuration on
page 275.
0710-057
Figure 88 Modem Configuration View
The top of the view shows the parameter set values associated with the
device. The parameter set and the configured component have the same
name. Parameters include station-specific settings and commissioning
time settings, such as PIN codes. For certain modem types, this list may
be empty. Usually there is no need to add or remove parameters, but just
to change the value to an appropriate default value.