User Manual

User's Guide ______________________________________________________________________
192 _________________________________________________________________ M210933EN-C
3. Proceed to the Device configurations view to configure the
Iridium communication settings.
a. For the device Iridium_1, you can select whether extra
information on the connection is sent to COM0. If you select
the Read clock time from Iridium option, the Iridium clock
counter is read when the SBD transmission has been
completed, and the QML logger clock is set according to this
counter.
b. For the device Iridium_modem_1, you can configure the
modem control options as for any other modem type. See
Figure 83 on page 192.
0711-172
Figure 83 Device Configurations View: Configuring
Iridium Transmission Parameters