User Manual

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 191
It is recommended that you keep the default settings in the
Configure frame:
2. Proceed to the Devices view by clicking Next.
a. Select Modem Iridium in the Available list.
b. Click the Add button.
c. Double-click the Connector list for Iridium_modem_1 in the
I/O Connections frame in order to select the COM port.
d. Leave the EXCITATION selection to <None>.
0711-171
Figure 82 Equipment View: Selection I/O Connection
for Iridium Modem
Option Default Value
Service connection enabled selected
Speed 19200
Data bits 8
Stop bits 1
Parity None
Hardware-controlled RTS selected
CTS required for transmission selected