User Manual

User's Guide ______________________________________________________________________
188 _________________________________________________________________ M210933EN-C
2. Under Options, select Command parser for handling remote
commands. When you select Extparser, the remote commands are
processed as described in section Remote Maintenance Commands
on page 199.
3. Under Transmit control, you need to enter a string that depends
on the service provider and destination network. The default
parameters are listed in Table 23 on page 188.
Formatting Report
In the Reports view, the reports that are sent to Inmarsat must be
formulated according to the following examples. The report structure
for the Internet e-mail is as follows:
TO:[e-mail]<CR><LF>
CC:[e-mail]<CR><LF>
SUBJECT:Your mail subject<CR><LF>
<CR><LF>
message body
The report structure for fax (phone number 3589123456) is as follows:
3589123456+<CR><LF>
<CR><LF>
message body
Linking Report to Communication
Port
In the Reports view, link the report to the communication port used by
the Inmarsat transceiver.
Table 23 Default Transmit Control Strings for Inmarsat-C
String Description
c 104 Destination ground LES/provider EIK/Sonera
s 0 Delivery service, store-and-forward
t 6 Destination Internet
e 28 Destination extension e-mail
l 0 Defines standard 8 bit alphabet