User Manual

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 133
I/O Connection
Select the Devices view in Lizard Setup Software.
0711-151
Figure 64 Modem I/O Connection
To obtain the correct default values you must first select the correct
modem type from the Available list. Table 11 on page 133 lists the
devices and the corresponding equipment selections.
Adding a modem to your configuration creates two I/O connections:
DATA and EXCITATION.
DATA is the RS-232 connection for the modem, and EXCITATION is
the optional power control output. For DATA, in the I/O Connections
frame select DSU232 (MOD1/1) as the default, which means that the
DSU232 module is installed at the module place 1 of the QML logger.
Table 11 Devices with Corresponding Equipment Selections
Device Equipment Selection in Lizard
DXM421 PSTN modem
MC35 GSM-Modem