User Manual

User's Guide ______________________________________________________________________
100 _________________________________________________________________ M210933EN-C
Barometer Module BARO-1
BARO-1 is an MCU-based measurement module for determining
barometric pressure. The module uses the capacitive Vaisala
BAROCAP® sensor and features barometric pressure calculation,
additional pressure calculations (HCP, QFE, and QNH), and internal
temperature compensation, which ensure accurate, corrected readings
for barometric pressure. The module includes a self-diagnostics feature.
BARO-1 replaces PMT16A module in data logger QML201C.
To configure BARO-1, proceed as follows:
1. Open an existing setup in the Setup view or create a new one.
2. Proceed to the Sensors view.
3. Select BARO-1 from the Available list and click the Add button
to insert the module into the setup.
1007-023
Figure 51 Configuring BARO-1 Module