Manual

User's Guide ______________________________________________________________________
62 ___________________________________________________________________M210784EN-E
To check the allowed commands at a specific level, give the help
command. Table 10 on page 62 lists the accessible commands in the
different user levels. Level 1 provides access to the minimum set of
commands and visibility of system parameters. Level 3 provides access
to all commands needed for normal administration and commissioning.
Level 5 provides access to all commands. For command reference, see
Table 22 on page 106.
Table 10 Accessible Commands in Different User Levels
User Level Commands
Userlevel 1 cd, copy, dir, errors, help, logshow, logshownext,
logshowprev, logstatus, rep, warnings, and zs
Userlevel 3 EXTFS, LOGFS, altitude, battery, cd, chmod, copy, del,
dir, errors, ftp, help, ipconfig, logdel, loggo, logshow,
logshownext, logshowprev, logstatus, logstop, md,
move, net, netif, ntp, paramset, paramsetclear, ping,
pslevel, rd, rep, reset, serial, sname, spclear, spset,
time, timezone, verify, warnings, winddircal0, zr, and zs
Userlevel 5 All the userlevel 3 commands and the userlevel
administrator rights