User Manual

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA_______________________________________________________________________ 77
Re-assigning Connectors
To quickly disconnect and reassign all the sensors or other equipment
already connected to the QML logger channels, proceed as follows:
1. Click the Disconnect All button.
2. Reassign the connectors either automatically by clicking the
Connect All button or manually as described in section Assigning
I/O Connections on page 76.
To disconnect only one sensor, double-click the text on the Connector
list and select <None> from the combo box displayed.
Additional Sensors View
In the Additional sensors view, you can select and configure the serial
sensors to be included in your setup; see Figure 32 on page 77.
1004-067
Figure 32 Additional Sensors View
NOTE
The information pane with general help information is available on all
the configurable items in case you need more detailed information.