User Manual

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA______________________________________________________________________ 135
The contents of the setup information sheets are listed in the following
tables.
Table 14 Equipment and I/O List
Col # Column Label Content
1 Connector Logger connector
2 Equipment name Setup name for the attached equipment
3 Equipment type Type of the attached equipment
4 I/O signal I/O signal identifier
5 I/O signal descr. I/O signal description
6 I/O handler Handler for the I/O signal, for example,
measurement name
Table 15 Statistical Calculations
Col # Column Label Content
1 Name Calculation name
2 Source Source for the calculated variable
3 Variable Name of the source variable
4 Functions Calculated functions:
- Min = minimum
- Max = maximum
- Avg = average
- Dev = standard deviation
5 Period [s] Total calculation period in seconds
6 Interval [s] Calculation interval in seconds
7 Validation % The amount of valid samples against total
samples before calculation results are marked
valid. For example, a value 67% indicates that
one hour calculation executed once per minute
must have 40 minutes of valid data before the
results are available.
Table 16 Meteorological Calculations
Col # Column Label Content
1 Name Calculation name
2 Calculation Calculation type
3 Input Input variable name
4 Source Source for the input variable
5 Variable Name of the source variable