User Manual

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA______________________________________________________________________ 111
checks the original statuses from bottom to top. Only one status string
is present at a time.
To configure a new conversion, proceed as follows:
1. Go to the Calculations view and click the Conv button.
2. Select Value status to string converter from the Available list in
the Select calculation frame and click the Add button.
3. Enter the new status string to replace the default status; see Figure
51 on page 111.
0711-069
Figure 51 Calculations View: Configuring Status Strings
(1/2)
Some of the status strings listed in Table 13 on page 111 can be
present concurrently, for example, Manual and Valid.
Table 13 Fields under Status Strings
Status String Field Description
No value available Unable to retrieve status
Unknown No valid status
Valid Status of the retrieved data item is valid
Invalid Status of the retrieved data item is invalid
Suspicious Value of the data is suspicious (probably OK)
Default Data item has the default value
Manual Data item is set manually
Not available Typically, the data item is not yet measured