User`s guide

USER'S GUIDE____________________________________________________________________
Table 9 General Specifications
Property Description / Value
Operating temperature range
Probe
Electronics
-70 … +180 °C
-5 … +55 °C
Storage temperature range
(electronics)
-40 … +70 °C
Sensor protection:
Standard
Stainless steel sintered filter
Connections Screw terminals for 0.5 ... 1.5 mm
2
wires
Table 10 Operating Voltage Specifications
Property Value
Operating voltage DC: 10 … 35 V
AC: 9 … 24 V
NOTE
AC supply only possible without warming or chemical purge option.
Current consumption without warming or
chemical purge option
Voltage output: 12 mA at 35 VDC
20 mA at 24 VAC
Average power needed during warming
(option)
1 W (100 … 300 mA
modulated current)
Maximum power needed during chemical
purge (option):
1.4 W (100 … 300 mA
modulated current)
Options
Table 11 Modules, Sensor Heads and Outputs
Module Sensor Heads Output
RH and T module One sensor head RH and T output
Dewpoint module Warmed humidity sensor
head
Dewpoint output
RH and T module with
two sensor heads
Warmed humidity sensor
head
RH and T output
50 ____________________________________________________________________ U33
9EN-1.3