User`s guide

USER'S GUIDE____________________________________________________________________
0403-041
Figure 18 Indicator and Probe Information
The following numbers refer to Figure 18 above.
1 = Software version of the MI70 indicator
2 = Serial number of the MI70 indicator
3 = Probe type
4 = Software version of the probe
5 = Serial number of the probe
Factory Settings
The factory settings can be restored to clear all the changed settings
and data memory of the indicator. Restoring factory settings does not
affect the probe calibration.
1. Open the menu by pressing Open.
2. Select Settings and press .
3. Select Factory settings and press
Revert. To confirm the
selection, press
Yes. Power is turned off automatically.
When turning on DM70 again, the factory settings are restored. You
will have to set the language, date, and time again.
42 __________________________________________________________________ M010091EN-F