User`s guide

Chapter 5 _____________________________________________________________ User Interface
The default values are 28.96 for DMP74A/B (air) and 146.06 for
DMP74C (SF6).
Purge Interval
The time interval at which the automatic sensor purge is performed
can be changed between 1 ... 48 hours. For instructions, refer to
section Changing Automatic Sensor Purge Interval on page 30.
Device Information
0403-040
Figure 17 Device Information
Basic information about the indicator and the probe is found as
follows:
1. Open the menu by pressing Open.
2. Select Settings and press .
3. Select Device information and press Show.
4. The first display gives the information on the MI70 indicator.
For details on the probe, press
More and then press OK.
See Figure 18 below.
5. To return to the basic display, press
Exit.
VAISALA _______________________________________________________________________ 41