User`s guide

USER'S GUIDE____________________________________________________________________
3. Select Date and time and press .
4. For the desired date, select Date and then press Set. Use the
arrow buttons to change the date. Confirm the selection by
pressing Select. To change the date format, select from the
alternatives and press Select.
5. For the desired time, select Time and press Set. Use the
arrow buttons to change the time. To confirm the selection,
press OK. To change the time format, select 12-hour clock
and press On/Off.
6. To return to the basic display, press Exit.
Measurement Settings
0602-006
Figure 16 Measurement Settings Menu
Automatic Auto-Calibration
To turn the feature on, press On. To turn the feature off, press
Off.
Automatic Purge
To turn the feature on, press On. To turn the feature off, press
Off.
Molecular Weight
The ppm
w
M setting is used to give the molecular weight of the
measured gas. This value is required in ppm
w
(weight) calculation.
40 __________________________________________________________________ M010091EN-F