User`s guide

USER'S GUIDE____________________________________________________________________
1. Open the menu by pressing Open.
2. Select Display and press .
3. Select Quantities and units and then press .
4. To select a quantity, move on the desired quantity using the
arrow buttons and then press Select.
5. To change the unit, move on the desired quantity using the
arrow buttons and then press Unit (°C or °F).
6. To hide a quantity, move on the desired quantity using the arrow
buttons and then press Hide.
7. To return to the basic display, press Exit.
8. If you want to check the environment settings, press
Yes. Otherwise press No.
NOTE
Units °C atm and °F atm indicate that the dewpoint or frost point is
converted from process pressure to atmospheric pressure.
Below you will find an example of the Quantities and Units menu.
0404-021
Figure 6 Quantities and Units Menu
Rounding
You can select a one- or two-decimal display using Rounding. As a
default, rounding is turned off
(=a two-decimal display is in use).
1. Open the menu by pressing Open.
2. Select Display and then press .
3. Select Rounding.
22 __________________________________________________________________ M010091EN-F