User`s guide

USER'S GUIDE____________________________________________________________________
3 = Selected quantities. Up to three of the following quantities
can be selected at a time: dewpoint (T
d/f
, T
d
), relative
humidity (RH), absolute humidity (a), mixing ratio (x), parts
per million (H
2
O), temperature (T).
4 = The Graphic
1)
shortcut button changes the display into a
curve mode.
5 = The Hold/Sa
1)
shortcut button holds the display and allows
you to save the reading into the memory.
6 =
The Record shortcut button takes you to the
Recording/Viewing menu. This is the default shortcut
button. In the figure it has been changed to Start/S.
1)
The Graphic, Hold/Sa, and Record functions above the shortcut
buttons are set at the factory. You can change them to refer to other
functions as shown in Figure 4 on page 19 where Start/S has replaced
Record. See also section Program Shortcut Keys on page 38.
Menus
The settings can be changed and functions can be selected in the
menus. Follow the instructions below:
1. Open the main menu by pressing one of the buttons.
2. Press Open within 5 seconds. Otherwise, the basic display
returns. If this happens, start from step 1 again.
3. Move in the menus using the
buttons.
4. Select an item with the
button.
5. To return to the previous level, press .
6. To return to normal operation, press Exit.
20 __________________________________________________________________ M010091EN-F