Owner`s manual

Mass Storage Device operation
23
ML+ Player operational notice
i
?For scenario 2 and 3 files and folders will be available in the ML+ player in the order they were recorded on the disc,
which is not always the same order files are located and displayed on your PC.
?ML+ player will recognize all available folders (including empty and non-playable information folders) on the first USB
storage/HDD connection or if playlists cache information is not available or erased. Once playlist’s cache files are built
and the system has been restarted, ML+ player will display playable information only.
Connecting USB device:
?ML+ player analyzes a USB device for playable partitions every time it's plugged into ML+ player. ML+ supports up to 4
partitions per USB storage device and 6 partitions total.
?The vehicle's Radio recognizes every partition as a separate disc.
?Non-playable partitions will not be recognized by ML+ player.
?If at the time you connect USB storage, ML+ player is playing audio files from a HDD, ML+ player will recognize the
USB storage device but will continue playing HDD files. The USB storage device becomes available as a source
shortly after connection, as an additional DISC. If USB storage is the only one available source, then ML+ player will
play it automatically.
Disconnecting USB device:
?Please follow our recommendation on ”How to eject a USB device”.
?If USB Storage is the only connected device to ML+ player then once it is ejected ML+ player will stop playing and will
wait for the next available USB Storage device.
?If USB Storage as well as a HDD are connected to ML+ player and USB Storage is currently playing, disconnecting of
the USB Storage device will force ML+ player to start playing the first available HDD partition.
Disc Loading:
?While loading discs ML+ player will flash the first disc until all available discs are detected. Once all available discs are
detected ML+ player will make them available for selection.
?If a disc is selected but it is not ready to play, ML+ player will flash this disc until it's fully processed or a reasonable
amount of information is processed. ML+ player will start playing even if processing is not over for this disc as long as a
reasonable amount of information has been processed. Playlists become available for browsing as they are processed
on the disc.
?After a reasonable amount of information has been processed and a disc starts playing processed playlists, ML+ player
will flash a SCAN button to notify you that the rest of the playlists are still being processed.
?If a substantial amount of errors (bad or non-existing files) are detected on the disc, ML+ player may start the re-
building process automatically, which will make this disc flash until it is ready to play.
How to Copy files to HDD
i
?In order to load audio files and/or M3U files to a HDD you need to put those files on USB storage first, along with
“mmlqcmdf.cmd” file. The “mmlqcmdf.cmd” file must be located in the “/multimedialinq/control/” folder. It must be
located on the first FAT16/FAT32 partition if more than one is available.
?The command file “mmlqcmdf.cmd” file contains a list of commands to add/remove/modify data on the internal HDD.
?To create/modify command file please use “Remote Storage Manager” software on our website
?Command file processing will start after all available discs are ready and verified. Command file processing is executed
in background mode.
?If changes in the command file are critical for playing music files from HDD, ML+ player will make this disc unavailable
for play.
?If changes in the command file are not critical then ML+ player will make the changes, but will only make those
changes available after the command file is executed and source is completely re-built. Since the re-building process
could take some time, command file changes may not be available immediately. The SCAN button will flash during the
re-building process.
?Command file processing may be interrupted and resumed if file hasn't been changed.
www.vaistech.com/software/RSManager.exe