Owner`s manual

Video Graphics Mode
11
VAIS Technology safety message is displayed for 5
seconds. After 5 seconds you can push anywhere on the
screen to go to Video Graphics menu. After 5 more seconds
safety message will go off.
You need to touch anywhere on the screen to get to the
MediaLinQ Plus side bar Menu.
MediaLinQ Plus screen will be displayed when you start the car, if you turn your car off with ML+ Video Graphics Mode
playing any of its audio sources, unless reverse gear was activated shortly after the vehicle start up, in this case
Navigation MAP screen will be displayed after you switched your gear to DRIVE position.
To activate Video Graphics Screen push [AUDIO] button.
Switch to different MediaLinQ Plus Video Source
MediaLinQ Plus Video Graphics Sources Setup
Setting for Active Audio/Video Source
Switch to CD-MP3 emulation mode. To return back to ML+ Video Graphics mode
(VG mode), select MediaLinQ Plus CD-MP3 source and press [FOLDER SCAN].
Activate Backup Camera (available only when Rear Gear was
engaged at least once before this feature is used).
To activate MediaLinQ Plus VG mode press [AUDIO] button.
Touch [SETUP] button to
Setup desired Audio/Video
and Video Only Sources.
Input Status - Active or Inactive
Input Alias - Choose from the following (Audio/Video 1, AV Player, DVD, Game Console)
Input Source - Select input source for Audio/Video 1.
Can be chosen as “iPod” (iPod Out and/or iPod Video Out Source) or “Video” (Universal Audio/Video Source).
Video Signal Type - Component is standard if iPod is select as Input Source.
If Audio/Video is selected as Input source, Component or Composite may be selected as the Video Signal Type.
Touch to select Source for settings
Audio/Video 1 Source Setup