User Guide
2.5.10 Delay Setting
There are 5 kinds of settings in the delay settings, which are:
2.5.11 Time Zone Setting
Click “Time Zone” to enter the setting, and when selected one time zone, click
“Setting” to set successfully.
Ringing time (can be set to 5-90 seconds, the default value is 30 seconds):
the ringing time when the indoor unit is called.
Picture rotation time (can be set to 30/60/90 seconds, the default value is
60 seconds): the time for picture rotation after the indoor unit enters the
screen saver.
Screen saver time (can be set to 30, 60, 90 seconds, the default value is 60
seconds): the time that no operation is performed on the indoor monitor until
the screen saver is triggered.
Alarm delay (can be set to 0, 30, 60 seconds, the default value is 60
seconds): set the time from when the alarm is triggered to the make the alarm
sound.
Alarm sound duration (can be set to 3, 5, 10 minutes, the default value is 5
minutes): Set the duration of the alarm sound after the alarm is triggered
After setting, click the Save button to save the settings.
2.5.12 Video Brightness
Adjust video’s brightness, contrast, saturation, hue.
2.6 System Settings
Click “System Settings” in Main GUI and input the system pin code “666 666”
to enter the system settings.
Pic 2.5.9
Pic 2.5.10
Pic 2.5.11
Pic 2.5.12