User Guide
Click “Language” to enter the setting, and it is available for Russian, English,
Chinese, Spanish, Turkish, Portuguese, Dutch, French, Italian, Bulgarian.
When selected one language and need to click “OK” to set successfully.
2.5.6 Language Setting
- “Prev”: Page Up
- “Next”: Page Down
: Increase the brightness (+)
: Decrease the brightness (-)
Note: “60” as the default screen brightness and the brightness range is “1-100”.
2.5.7 Screen Brightness Setting
Click “Brightness” to enter the setting, then,adjust the brightness accordingly and
need to Click “OK” to set successfully if you adjusted the brightness.
2.5.8 Wallpaper Setting
Click “Wallpaper” to enter the setting, and when selected one picture, click “Set as
wallpaper” to set successfully. And it is available for selecting the picture in
2.5.9 Screen Saver Setting
Click “Screen Saver” to enter the setting that is including Click “Delay” to enter the
setting that is including “Black”, “Time”, “Clock”. It will be in “Screen Saver” status
without any operation for 60 seconds automatically. And when you selected one
type and need to click “OK” to set successfully. Screen saver will turn off if without
any operating in 60s.
--“ Black ” is stand for “ Black Screen Saver ”.
--“ Time ” is stand for “ Time Screen Saver”.
--“ Clock” is stand for “ Clock Screen Saver”.
Note: The system default in “Black Screen” status would be started automatically from 0:00
to 06:00 am.
Picture screensaver:
2. User need to create a folder named in “screensaver” in SD card, and put
the pictures into the folder.
3. The pictures put in “screensaver” has below requirements:
Picture format is JPG
Picture resolution≤1920*1080
Picture file size ≤ 3 MB
1. Carousel the pictures in the SD card in the standby mode, after carousel one
hour the screen will be turned off.
“Wallpaper” folder from SD Card.
Pic 2.5.6
Pic 2.5.7
Pic 2.5.8