Wireless IP Tuya Video Intercom User Guide MC-0753-V1.
Content 1. Monitor and outdoor pairing -----------------------------------------------3 1.1 Monitor and outdoor A pairing -------------------------------------------------------3 1.2 Monitor and outdoor B pairing -------------------------------------------------------3 2. Monitor Operation Instruction ------------------------------------------4 2.1 Main GUI --------------------------------------------------------------------------------4 2.
1 Monitor and outdoor pairing 2 Monitor Operation Instruction After the monitor and outdoor panel are powered on, press and hold the LINK button of the monitor, press and hold the outdoor panel pairing button at the same time, and release the button when the signal light flashes quickly to complete the pairing. 2.1 Main GUI 1.1 Monitor and Outdoor A pairing The light flashes quickly when pairing is successful Pic 2.1 The graphic UI can be switched between apartment building, small building and villa.
Quick browse community message (Only for Apartment System) Community Message 4) Status Icon Instruction Pic 2.2.1 1) The device will save the call records which includes Missed Call, Dialed Call, Received Call and records in details (Date,Time, Read Status). Unread public message: Connected Network Disconnected IP Conflict 2) Choose the corresponding device and Click “ View records in details included pictures or videos. ” to check the Arm Disamring Alarming Security Status Pic 2.2.2.
2.2.3 Message Record Visitor can leave “Voice or Video Message” to householder, if there is no response after the outdoor station is pressed. And click “View” to know the message details included Device Info, Date Time, Record Status after you selected one record. Meanwhile, you can delete a recorder all records after selected. Pic 2.2.5 2.3 Monitoring Center Available to monitor all the outdoor stations, IP camera, and can snapshot pictures and unlock at the monitor interface. The monitor time is 1 min.
2.4.2 Internal Call Between Indoor Monitor Extension 3). Run the APP, register an account with correct country and area. After set the indoor monitor room number, all indoor monitor extensions support “Click to call the monitor extension” or “the other is not online” if the monitor extension is not setting successfully or offline. Noted: If monitor room number is default, then there is no extension for it. 4). Login the APP after registration. 5). Scan QR code add the monitor into APP.
① Hang up (back): exist the interface when press this icon while talking or monitoring. ② Speaker: Can hear the voice from outdoor station when turn on, and no voice when turn off. Can not talk while monitoring. ③ Picture snapshot: Can snapshot the images while talking or monitoring. ④ Micphone: Call panel calls and answered on smartphone, turn on this icon, pic 2.4.3.5 pic 2.4.3.6 APP Interface Introduction ① ⑫ the micphone is on, the voice can go to outdoor station.
NOTE: a. All member in same device can get the message once visitor call from door station. b. Admin can add or move all members from App, Enter “Me”-------Home Management------remove member as you want. 2.5 User Settings Click to enter “User Settings Interface”. : Click “One Circle Button” to enter the next user settings page. Pic 2.4.3.8 Pic 2.5 a. Available to, modify the device name. 2.5.1 System Info b. Available to view the device info.
-Available to select the ringtone in “ring” folder from SD Card. -When you selected one ringtone and click “Listen” for the audition. Pic 2.5.4 2.5.5 Volume Setting Pic 2.5.2 2.5.3 Time & Date Setting 1) 24-hour time system as the default and available to set Year / Month / Day / Hour / Minute, Save after setting. 2) Format switch: switch the Date format as Y/M/D, D/M/Y, M/D/Y.
2.5.6 Language Setting “Wallpaper” folder from SD Card. Click “Language” to enter the setting, and it is available for Russian, English, Chinese, Spanish, Turkish, Portuguese, Dutch, French, Italian, Bulgarian. When selected one language and need to click “OK” to set successfully. - “Prev”: Page Up - “Next”: Page Down Pic 2.5.8 2.5.9 Screen Saver Setting Pic 2.5.6 2.5.
Pic 2.5.10 2.5.11 Time Zone Setting Click “Time Zone” to enter the setting, and when selected one time zone, click “Setting” to set successfully. Pic 2.5.9 2.5.10 Delay Setting There are 5 kinds of settings in the delay settings, which are: Ringing time (can be set to 5-90 seconds, the default value is 30 seconds): the ringing time when the indoor unit is called.
: Click “One Circle Button” to enter the next system settings page. 2.6.2 System Password Setting Click “System Password” to enter the setting menu that input the old passcode “666 666” firstly. And new passcode need to input twice, then, click “OK” to set successfully. Pic 2.6 2.6.1 Monitor Extension Setting Caution: Don’t setting monitor extension before setting “Door” successfully. Apartment system system—Extension unit setting Pic 2.6.2 Change the last two digits into 02 or other digit.
3). Click “Add” to name “IP Camera” such as “Elevator Hall” and click “Enter / ”.Then, input “ IP Camera IP Address” such as “192.168.188.2”. 4). “User” need to input “Administrator Name and Passcode” which is in User Manual of IP Camera, it will return IP Camera Menu and there is a camera name “Elevator Hall”. Click “Delete” to have IP Camera List and selected one, then, click “Delete” to have a notification whether delete it or not. 5).
2.6.8 Outdoor Station Parameters Resetting Support to review and change High level and Villa Outdoor Station Parameters. 3 Technical Parameter 1). Input “Door Extension Number” and click “OK” to have related door extension parameters such as “Unlock Time”, “Ring Volume”, “Call Volume”, “Motion Sensitivity”, “Software Version”. 2). Support to change the parameters, need to delete the previous parameters and input new ones.Then, click “OK” to change successfully. 4 Install The Indoor Monitor Pic 2.6.8 2.
