Operation Manual

42 Installation instructions VRT 360f
Dial Test Test procedure
Press and
push P
button for
approx. 3
seconds.
Heating
request
A heating request of
50°C is simulated.
The burner on the
boiler starts up and
the pump starts (only
up to the maximum
supply temperature of
the boiler).
Turn Circulation
pump
The circulation pump
is activated. All other
elements are switched
off.
Dial Test Test procedure
Press Radio route The radio route
is tested. Radio
signals are sent to
the receiver every 5
seconds (max. 99).
The number of
correctly received
radio signals is
displayed.
Press Display test All display elements
are displayed.
Press Software
version
The software version
is displayed.
Table 11.3 Service/diagnostic level
11 Start-up