Installation manual

41Installation Manual for VRC 400 weather compensator
Start-up 11
Dial Test Test procedure
Press and push
P button for 3
seconds
Heating request A heating request of 50 °C is simulated. The burner on the
boiler starts up and the pump starts (only up to the maxi-
mum flow temperature of the boiler).
Turn Hot water request A hot water request is activated, charging pump starts
working, all other elements are switched off.
Turn Circulation pump The circulation pump is activated (if connected). All other
elements are switched off.
Press Display test All display elements are displayed.
Press Software version The software version is displayed.
Table 11.2