Specifications

€
*p*r*tE*r:
lf
you
live in a hard water area
please
do
not
set
the control knob above the mid
(12
o-clock)
posi-
tion to
prevent
excessiv
scale formation
(fig.
8.5).
.
The warmstart system
is activated by turning the
hot
water temperature control
knob
(1)
all the
way
to
the
very
right
for
a short
time.
The
green
indicator light
will now illuminate. Reset the
hot water temperature
control knob to the desired
setting.
The
boiler
will now
provide
instantaneous delivery
of hot water directly
when
a
hot water tap is turned on.
.
The warmstart system
is switched off by turning
the
hot water
temperature
control
knob
(1)
all the
way to
the very
left for
a
short time.
The
green
indicator
light
is not illuminated.
Reset
the
hot water temperature
control knob to the desired
setting.
_.--=
Note:
u
lrrespective of whether the
warmstart facility
is
switched on or off,
the boiler
will
automatically
operate
to
provide
hot
water whenever a
hot
water tap is opened.
lExr!.r)
Fig. 8.7: Drawing off hot
water
Obtaining hot water
(turboMAX
plus
only)
On opening a hot water tap
(1)
at a supply
point
(basin,
shower, bath, etc.) the turboMAX
plus
boiler
will auto-
matically
operate to
deliver hot
water.
On closing the tap the boiler
switches OFF
(or
continues
to operate
for
central
heating if required).
The
pump
and
fan will
continue to operate
for a short
period.
Fig. 8.5: Domestic hot water supply
YUarmstart operation
(turboMAX
plus
only)
The warmstart
facility
provides
instantaneous
delivery
of
domestic hot water from the turboMAX
plus
boiler. When
the warmstart system is switched ON the boiler
will
automatically light
periodically
to
maintain
the
internal
temperature of the boiler at approximately
4O
oC.
When
the warmstart
system
is switched OFF a short delay may
be experienced in obtaining hot
water
at the tap.
fw'
f,.t.
f-'t'
Fig.
8.5: Switching the warm start on and off
lnstructions for use turboMAX
plus,
thermoCOMPACT