Technical data

Installation and maintenance instructions ecoTEC plus 937 0020031552_06 25

5.7 Fitting the appliance hanging bracket

Fig. 5.3 Shift load storage tank with hanging bracket

Fix the hanging bracket (1) to the wall using the plugs

and screws (2) provided with the appliance.

Lift the shift load storage tank out of the packaging

(see Section 5.1).

Lift the shift load storage tank (3) onto the wall so

that it is located slightly above the hanging bracket

(1).

Slowly lower the shift load storage tank onto the

hanging bracket so that the installation carrier on the

rear of the unit fully engages in the hanging bracket.

If the appliance is to be fitted in a timber

framed building ensure that the hanging

bracket is secured to a substantial part of the

timber frame capable of taking the full weight

of the appliance.

5.8 Mounting the combination boiler

Fig. 5.4 Mounting the combi boiler on the shift load storage

tank

Lift the combi boiler out of the packaging (see Sec-

tion 5.1).

Lift the combi boiler (2) onto the shift load storage

tank so that it is located slightly above the shift load

storage tank (1).

Lift the combi boiler at both sides of the base.

Lower the combi boiler slowly onto the hanging

bracket on the shift load storage tank so that the

installation carrier on the rear of the combi boiler

fully engages in the hanging bracket on the shift load

storage tank.

Sequence of operations during installation 5