Technical data

Installation and Servicing ecoTEC plus18
4.1.4 Contents included with delivery
The Vaillant ecoTEC plus is delivered pre-mounted in
a package unit. Check that all the parts have been
delivered intact (see fig. 4.2 and table 4.1.
DO NOT remove the boiler from the polystyrene base
at this stage.
Place aside the flue adaptor and connections pack
until required.
Note
Care should be taken not to scratch the white
surface of the boiler casing.
4 .2 Flue exit
Refer to flue system installation instructions for full
details.
Danger!
Vaillant appliances are certified only for use
with genuine Vaillant flue pipes. Only use
genuine Vaillant flue pipes. Malfunctions can
occur if you use other accessories. These may
result in damage and injury. You will find a list
of genuine flue pipes in the Vaillant installation
manual for flue pipes.
The CE mark is valid only if the appliance is
operated with Vaillant flue pipes.
4.2.1 Other flue options
Flue instructions for other flue systems such as
vertical RSF flues, flues run to the side of the boiler
and the use of additional bends etc. are detailed in the
flue installation instructions.
4 Boiler installation sequence
Fig. 4.2 Contents included with delivery
Table 4.1 Contents included with delivery
Item Quantity Description
1 1 B
oiler
2 1 Hanging bracket
3 1 Flue
connection adaptor
4 1 Instruction booklets
5 2 Guar
antee card, envelope and log book
6 1 T
emplate
7 1 Screws/wallplugs
8 1 Gas
service valve, compression couplers
and condense drain pipe coupler
3
1
2
4
5
7
6
8
Supplied by HeatingSpares247.com