Technical data

36
5 Commissioning Part I
Instructions for installation and servicing ecoMAX36
When altering values the display will flash.
4 Press and hold the ”i”–button to save the required
value to memory. When the value is saved, the display
will stop flashing.
5 Diagnostic mode is cancelled as follows:
Press the ”i” and ”+”–buttons simultaneously
or Do not press any key for approximately four minu-
tes. The display will now return to its normal state
(current heating–system flow temperature, e.g. 45°C).
≈ 5 sec
Appliance Maximum net heat input Maximum gas rate Maximum gas rate
in kW Natural gas in m3/h Propane in kg/h
ecoMAX 613/2 E 13.5 1.43 1.05
ecoMAX 618/2 E 18.4 1.95 1.43
ecoMAX 622/2 E 22.4 2.37 1.74
ecoMAX 635 34.9 3.70 2.70
ecoMAX 824/2 E 23.0 2.43 1.78
ecoMAX 828/2 E 28.0 2.96 2.18
ecoMAX 835 E 35.0 3.70 2.70
Tab. 5.1 Maximum gas rates.
83 41 77_12 GB04.04.qxd 22.09.2004 12:34 Uhr Seite 36