Installation manual

Installation manual auroTHERM 0020077994_0032
6.3 Fitting the collectors
1
2
3
Fig. 6.1 Preparing the frame
• Open the frames.
a
Caution!
Follow Tables 6.1 to 6.4 without ex-
ception to determine the required
weights!
With screwed connection on the roof:
• Fasten the rear section to the base section
with a retaining pin and locking clip.
1
VTK 570/2
VTK 1140/2
1
Fig. 6.2 Mounting the gravel trays
If gravel trays are used:
• Slide the gravel tray (1) on the base section.
• Fasten the rear section to the base section
with a retaining pin and locking clip.
60°
45°
30°
1
2
Fig. 6.3 Frame assembly
• Insert the telescopic sections into each
other, until the holes of the desired angular
position are placed one above the other.
h
Note
You can choose settings of 30°, 45°
or 60°.
• Insert the retaining pin into the correspon-
ding hole (1).
• Fix the retaining pin with the safety clip (2).
6 Flat-roof mounting