QuickSpecs

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration
HP Models HP ProLiant DL580 Gen8 Configure-to-order Server 728551-B21
Factory Integrated Models ship with:
4U Server Chassis with front-accessible processor and memory drawer
Intel® 602J Chipset
Embedded HP Smart Array 12 G P830i/2G FBWC Controller
(5) Hot-plug SAS/SATA SFF SSD or HDD Bays (Lower)
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
(8) USB 2.0 ports (2 front, 4 rear, 2 internal)
(2) video ports (1 front, 1 rear)
(1) microSD card slot
(1) Trusted Platform Module (TPM) connector
(4) Hot-plug redundant fans standard, front accessible
BIOS Legacy mode(default) or Unified Extensible Firmware Interface (UEFI) mode
(Optional)
HP Integrated Lights-Out 4 (iLO4) standard management
HP iLO4 Embedded Remote Support Technology
HP Insight Control Server Provisioning
HP Insight Online
HP Active Health System
System Insight Display
Rack rails and mounting hardware
NOTE: PCIe slot availability is dependent on the number of processors installed. Please
refer to the "Expansion slots" section for more details.
NOTE: A minimum of two processors are required. The system may have three and four
processors installed.
NOTE: A minimum of two memory cartridges are required (one per processor).
NOTE: A minimum of two memory DIMMs are required per cartridge (minimum of four
DIMMs per server).
NOTE: A minimum of two power supplies are required.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors NOTE: If more than two processors are desired, select one xxxxxx-L21 and additional
processors would be xxxxxx-B21.
Fifteen-Core Processors
HP DL580 Gen8 Intel® Xeon® E7-4890v2 (2.8GHz/15-core/37.5MB/155W) FIO Processor
Kit
728955-L21
HP DL580 Intel® Xeon® E7-4880v2 (2.5GHz/15-core/37.5MB/130W) FIO Processor Kit 728957-L21
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14743 North America — Version 1 — February 18, 2014 Page 21