User manual

Four-Channel GSM VoIP Gateway
10
3 Configuration Guide
To configure the GoIP4 Gateway, you must login to its Web server via the LAN or PC port.
The LAN port is factory preset to IP address 192.168.0.100 and the PC port is set to the fixed
IP 192.168.8.1.
If you lose the IP address information for LAN port, just dial a call to GoIP4 Gateway’s SIM
card phone number. When the call is connected, you will hear a dial tone. Then dial “*01#”
for English voice prompt on the LAN IP and “*00#” for Chinese voice prompt on the LAN IP.
The LAN IP Address can also be obtained by sending a SMS message to the GSM phone number.
The GoIP4 will then reply with a SMS message containing the LAN IP address.
If you want to obtain LAN port IP by sending a SMS message, please send” INFO “or” info”.
Another way to access the GoIP4 Gateway is via the PC port. You will need to change your
computer’s LAN configuration via the Network Connections under the Control Panel.
Windows: Control Panel--Network Connections--Local Area
Connection Property--

 Internet Protocol (TCP/IP)’s Property
Set an unused IP address that is in the same segment as the PC port address.
Once either the IP address of the LAN or PC port is known, you are now ready to
access the Web server of GoIP4 Gateway.