Manual

page 9 of 35
➨ Use appropriate safety work materials and methods if
necessary, e. g., steam sterilization, sterilization indica�
tors or germicides. For notes concerning the steriliza�
tion of wetted parts, see the “Technical Data” section
and “Cleaning and decontaminating”. It is the user´s
responsibility to ensure effective sterilization.
+ Check the collecting bottle regularly for cracks. Do nev�
er use a collecting bottle with cracks nor expose it to
vacuum.
+ Comply with applicable regulations when disposing of
chemicals. Take into consideration that chemicals may
be polluted. Take adequate precautions to protect peo�
ple from the effects of dangerous substances (chemi�
cals, thermal decomposition products of uoroelas�
tomers), wear appropriate safety-clothing and safety
glasses.
+ Use only OEM spare parts and accessories; other�
wise safety and performance of the equipment as well
as the electromagnetic compatibility of the equipment
might be reduced.
The CE mark or the cTUVus mark (see rating plate)
may become void if original equipment manufacturer
parts are not used.
+ In case of leaks in the manifold, aspirated substances
might be released into the environment. Comply es�
pecially with notes on operation and use and mainte�
nance.
+ Due to the residual leak rate of the equipment, there
may be an exchange of gas, albeit extremely slight, be�
tween the environment and the vacuum system. Adopt
suitable measures to prevent contamination of the
pumped substances or the environment.