Manual

page 7 of 35
Setting up and installing the system
• Comply with maximum permissible pressures and
pressure differences; see section ”Technical data”. Do
not operate the pumping unit with overpressure at the
inlet or outlet.
Provide a rm level platform for the equipment. Ensure a
stable position of the equipment. Ensure that hose con- Ensure that hose con�
nections are mechanically stable.
Connect the BVC basic and BVC basic G to a suitable
vacuum supply (vacuum pump, local vacuum network
VACUU•LAN
®
).
The diameter of the an outlet tubing should be at the least
as large as the diameter of the pump connections.
Comply with all applicable and relevant safety require-
ments (regulations and guidelines), implement the re-
quired actions and adopt suitable safety measures.
Ambient conditions
+ Pay attention to the permissible maximum ambient
temperatures (see ”Technical data”).
To the best of our knowledge the equipment is in com�
pliance with the requirements of the applicable EC-direc�
tives and harmonized standards (see ”Declaration of con�
formity”) with regard to design, type and model, especially
directive DIN EN 61010-1. This directive gives, in detail,
conditions, under which the equipment can be operated
safely (see also IP degree of protection).
NOTICE
NOTICE