Instruction Manual

page 20 of 29
Important notes on use of disinfectants
Aggressive disinfectants which release chlorine or oxygen radicals, e.g.,
sodium hypochlorite (chlorine bleach) or peroxide compounds can cor-
rode the materials.
+ Therefore, prolonged use of these disinfectants is strongly discour-
aged. After brief disinfecting operations, rinse thoroughly to avoid
leaving residues of disinfectant.
The use of the disinfectant Sekusept
®
Plus (Manufacturer: Ecolab GmbH
& Co OHG, Düsseldorf, Germany) in extensive in-house testing did not
cause any damage. Hence the disinfectant Sekusept
®
Plus is preferred.
Comply with use and safety instructions of the manufacturer!
+ Using corrosive disinfectants may result in damage,
malfunction and/or failure of the equipment.
+ Chlorine may damage the materials of the equipment
or the vacuum supply.
+ Leaking of liquid from a damaged aspiration system
may lead to exposure of personnel and material or to
damage/destruction of wetted equipment or laboratory
furniture.
+ For information about the compatibility with the materi-
als, ask the manufacturer of the disinfectant.
+ The materials of the system are listed in the section
”Technical data”.