User manual

Vehicle DVR System
7
 Alarm I/O
1.Alarm IN #1 (Red+12V)
2.Alarm IN #2 (Brown+12V)
3.Alarm IN #3 (Yellow+12V)
4.Alarm OUT (Orange+12V)
G. Ground Wire (Black)
 Alarm IN Application
Monitor can switch to full screen of rear view or side view. Driver can
view blind spot by means of this application.
 CH 1  Reversing Signal Input
 Ground  Connected with the #2 & #3 black wire of the power
cable.
Quad while no alarm Full Screen while alarm input
No alarm Alarm trigger
 Alarm OUT Application
12V, Max1.5A output connected with beeper or siren