User manual

7
D. Record / Stop-Record
1. Power on / Record
Turn on the power, and it will take approximately 40 seconds to
boot up. During the recorder booting up, the CF card indicator
LED will start flashing as the recording is in progress.
Light indicator:
● Red light: light on, means power on; light off, means no
power/power off.
●
Yellow light: light flashing
, means CF take recording; light off
means non-recording.
● Green light: light off means GPS not ready, light on means
GPS positioning ready.
★Remark: While using playback function in DVR, it cannot
take live recording at that time.
2. Power off/Stop recording:
Power off also stop recording, at then you can take out CF
card to read the recorded files.
Power Indicato
r
GPS Indicator LED(CF2)
Record Indicator LED(CF1)