User manual

13
(11) 3G Networking Setting (Only available when DVR with
specific 3G module)
(1) When enable the 3G networking function, Press the
right/left key on remote controller first to select 3G
ON/OFF, then press “confirm” key to save the change.
★ After setup finished, press the up/down key to check
information about 3G network settings are properly.
(12) Alarm setup
(1) When the alarm is triggered, the screen should display
which CH is triggered. Press the right/left button on
remote controller to select channel, then press the
“confirm” key set the channel.
★Check the explanation of back panel, in order to
facilitate triggering alarm information setting.