User manual

11
(5) Delete All Record Data (Format Disk)
(1) Delete All Record Data
Use right key or left key to select the selection then click
“enter” to confirm.
★Caution! All data will be deleted when you click “Yes”.
(6) Default Live View Channel Display
(1) Select the default live view CH after startup: Item selected
will be default live view display mode after DVR booting
completed.
(2) On this page, Use left key or right key to select Quad display
(Multi-CH) or CH 1 Display, then press “enter” to confirm.
(7) Power Management
(1) Power Management: Setup Extended Record period after
Engine shutdown.
(2) Use IR Remote controller for setting, Click Left key to move
one space for selecting time for delay-recording, then press
enter key to confirm.(The delay-recording period can be
0,5,10,15,20 minutes)