User manual

68
Step 1: Set your DVR network mode to static mode
1. Change the connection type to “STATIC” in DVR’s network setting
2. Assign the IP address to the DVR
Note: Be sure not to set up a duplicated IP address for the DVR. For example, if you
assign 192.168.0.100 to the PC, please change the IP address of the DVR to
192.168.0.101
3. Set the Netmask of the DVR: The address must be the same as the PC’s
setting.
4. Set the Gateway of the DVR: The address must be the same as the PC’s
setting.
Step 2: Modify your PC’s network setting to correspond to the DVR
For WINDOWS XP:
StartControl Panel Network and Internet ConnectionsNetwork Connections
Find your network adaptor and click the right button and choose “Properties”