User manual

16
7.3 Alarm Setup
 Channel
Select the channel to set. COPY icon can copy the present setting to other
channels.
 Sensor Mode
Sensor Mode alarm trigger. Set: OFF / NO / NC.
 Relay Mode
Relay Mode alarm trigger. Set: NO / NC
 Record Duration
The duration of the recording after triggered: 10, 20… 60 sec.
 Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30
sec.
 Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
 Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20
sec or off.
7.4 Motion Detection
 Channel
Select the channel to set. COPY icon can copy the present setting to other
channels.
 Enable
Enable/disable motion detection for each camera. Set: On/Off
 Sensitivity
Sensitivity level of motion detection. Set: 1~10. Higher value equal more
sensitive.