User manual


13
8.3 Motion Detection
 Channel
Select the channel to set. COPY icon can copy the present setting to other
channels.
 Enable
Enable/disable motion detection for each camera. Set: On/Off
 Sensitivity
Sensitivity level of motion detection. Set: 1~10. Higher value equal more
sensitive.
 Motion Area Setup
Setup by each small square.
Setup Operation Front Panel & Remote Controller USB Mouse
Area Selection [Up/Down/Left/Right] [Moving Cursor]
Set Detection Area: must set
on none detection
area(Transparent Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Clear Detection Area: clear the
set detection area: must set on
detection area(Green Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Return to Upper Menu [MENU] [Right Click]
 Record Duration
The duration of the recording after triggered: 10, 20… 60 sec. or off.
 Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30
sec.
 Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20
sec or off.