4CH / 8CH H.264 Digital Video Recorder USER MANUAL 2013 FEB V1.
WARNING Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine. Do not touch the power plug or case with wet hands as this could result electric shock. Do not forcedly bend or put heavy object on power cable as this could result in injury to personal or equipment. Do not operate with damaged power cord or loose electrical outlet as this could result in electric shock or accident.
CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. Specification ............................................................................................. 1 Front Panel ............................................................................................... 2 Installation ................................................................................................ 3 DVR Installation ........................................................................................ 3 System Operation .....................
1. Specification Video Format NTSC PAL Video Input 4 CH Input / BNC Audio Input 2 CH Input / RCA Video Output 1CH Output / BNC Audio Output 1CH Output / RCA XGA Output 800x600, 1024x768, 1280x1024, 1440x900 Display Mode Full Screen, 4CH Split Screen, Auto Switch, Picture in Picture Display Resolution 720 x 480 720 x 576 Highest 720 x 480 720 x 576 High 720 x 240 720 x 288 Normal 360 x 240 360 x 288 Max. 120 FPS Max.
2. Front Panel Power Indicator HDD Indicator The LED lights on when power on. The LED lights on when the HDD is written. Up To move up of the selection setting in the menu. Channel 1 Under the live viewing mode, channel 1 display. Channel select Left Channel 2 Fast Rewind Down Channel 3 Slow Forward Right Channel 4 Fast Forward Enter MENU Quad Pause Step Manual Record STOP Play Single channel (1~4ch) and quad display in playback mode. To move left of the selection setting in menu.
3. Installation TYPE 2: Network 1 VGA PC Monitor Output 2 Video In 3 Video Out 1CH Video Output (BNC) 4 Audio Out 1CH Audio Output (RCA) 5 Audio In 6 USB 2.0 Port 7 DC12V 8 LAN 4CH Video Input (BNC) 2CH Audio Input USB Mouse / USB backup or firmware update. Power Input RJ-45 Network Connection (for TYPE 2) 4. DVR Installation Connect the camera video output to the DVR video input port with BNC connectors. The camera install coaxial cable is suggested cat 6 or above.
Please refer to Display Setup - Live Viewing Mode for more information. DVR Network installation (for TYPE 2) Please connect DVR to HUB or router by using RJ-45 network cable and make sure the DVR network indicator LED is on. (Please refer to Network Setup for further network setting information of using static IP, PPPoE or DHCP. 5. System Operation There are 3 kinds of DVR control method: front panel, remote control and USB mouse. USB Mouse Operation 1.
Front Panel & Remote Menu Operation Mouse Operation Control Operation Select character from virtual keyboard [Up/Down/Left/Right] [Move Cursor] Keyin the select character [Enter] [Left Click] Exit the virtual keyboard [MENU] [Left Click]out of selection area Key Description of Virtual Keyboard Delete the previous character Switch to text input Enter key.
6. Display Setup There are 2 kinds of screen display mode: Live, Auto Switching . Live Viewing Mode The DVR will go to the live viewing mode after boot up.
Playback Operation Setup Operation Front Panel & Remote Control Fast Rewind [Fast Rewind] Fast Forward [Fast Forward] Step Forward [StepForward] Step/Pause [Step/Pause] Play 1x [Play] Stop [Stop] Digital Zoon None Drag by Left Click Derived Image None [Left click] 1~4 Single Channel Display [1~4 Channel] Select Channel [Double left click] 4 split Display [4 split] Under single channel [Double left click] USB Mouse Auto Switching 1.
Setup Operation Front Panel & Remote USB Mouse Controller Search [Enter] [Left Click] Select Channel [Up/Down] [Moving Cursor] Select Dates [Up/Down/Left/Right] [Moving Cursor] Playback [Enter] [Left Click] Return to Upper Menu [MENU] [Right click] or [Left click ] No data: no color, data of alarm trigger: red color, normal record data: green color. Select the first half of hour frame under the date, the playback will start from 00 mins: 00 sec.
Last Page Mark all the events in this page BackUp List all of recording data and click on one of record data to playback. Backup Please click “BACKUP” to backup the selecting file to USB memory stick. 8. Main Menu Camera Record Motion Network Log Search Back Up System ※ Network for TYPE 2 8.
Display Display the channel, set: On/Off Camera Color Setup 8.2 Hue: 0~50 Brightness: 0~50 Contrast: 0~50 Saturation: 0~50 Buzzer Duration The buzzer ON duration when video loss. Time Display Display the time in LIVE mode. Values: ON/OFF. Record Setup Record Enable Setup On/Off the channel. Watermark: Insert the words of watermark. Resolution Setup NTSC Recording Resolution: 720x480 / 720x240 / 360x240. PAL Recording Resolution: 720x576 / 720x288 / 360x288.
Frame Rate Setup Setting of Frame Rate: NTSC: 0-30 frames/sec; PAL: 0-25 frames/sec. Quality Setup Setting of recording quality: Values 1-5. The bigger value, the better quality. Pre Record setting Pre Recording time when motion alarm. Values: 0-10 seconds.
Audio On/Off the sound effects. Encode Mode Encoding of channel. Values: VBR or CBR. Record schedule setup Always and Schedule Record.
8.3 Motion Detection Channel Select the channel to set. COPY icon can copy the present setting to other channels. Enable Enable/disable motion detection for each camera. Set: On/Off Sensitivity Sensitivity level of motion detection. Set: 1~10. Higher value equal more sensitive. Motion Area Setup Setup by each small square.
8.4 Network Setup (TYPE 2) Mode Set the connection method. Set: Static IP, DHCP, PPPoE. Media Port Port used for stream media. Default is port 9000. WEB Port Port used for web access. Default is port 80. Command Port Port used for settings. Default is port 8000. Mobile Port Mobile phone port (factory default): 15961. IP Address Assigned IP address. Netmask Assigned net mask Gateway Assigned gateway HOST Name Set the HOST Name of DVR. PPPOE Need account and password for PPPoE.
DDNS setting HOST NAME DVR NAME DNS1 First Domain Name Server, Default : 168.95.1.1 DNS2 Second Domain Name Server, Default :168.95.192.1 DDNS Enable/disable Dynamic Domain Name server. Values: On, Off. DDNS Server DDNS Server, Values: 3322, dyndns, cctvdvr. When using DDNS server, HOST name, server name and account/password are required. E-Mail Setting E-MAIL Forward E-mail after alarm triggered. Enable: On/Off SSL Enable the SSL encryption.
30, 60 seconds. 8.5 Log Search Log type Set conditions for searching: type and time range. Log type can be ALL, Operation, Motion Detection, and Video Loss. Start/End time Set the search range (Year/Month/Day). Press [SEARCH] to search.
8.6 Backup Channel Backup all channels or single channel 1-4. Record Type Select all, normal or alarm. Start/End time Select the backup range of time. Press Search to start searching. The record list will be shown if available and follow [Record list] to backup.
8.7 System Time Setup HDD Display System Information Password Language Audio System Maintenance 8.7.1 Time Setting TYPE 1: no Network TYPE 2: Network Date/Time Select by using virtual keyboard. Date Format Setup Set: YY/MM/DD, MM/DD/YY. Time Format Setup Set: 24Hours, 12Hours. Time Zone Setup Time Zone setting of DVR.
8.7.2 HDD Setup Format Format the selected HDD Format HDD Overwrite Enable/Disable Overwrite, Values: On/Off. If Overwrite is enabled, the period can be set as 6, 12, 24, 36, 48, 72 hours and 7, 15, 30, 60 days. Pack Time Set the required packing time frame to allow the system to pack each saving file under continue recording mode. Pack time setting: 5 min, 10min, 15min, 20min, 30min, and 60min.
Format USB Memory Stick 8.7.3 Display Setting GUI Display GUI display mode can be VIDEO or VGA. Video Switching Time Set the switching time when switching channels in video mode. Values: 1-99 seconds. (0 sec is Off) VGA Switching Time Set the switching time when switching channels in VGA mode. Values: 1-99 seconds. (0 sec is Off) Switching Sequence Set the switching sequence of channels. Video Margin Set the display margins of the screen.
XGA Resolution XGA Resolution: 800x600, 1024x768, 1280x1024, 1440x900. 8.7.4 System Information Provide the firmware version, MAC address, HDD status…. 8.7.5 User Password TYPE 1: no Network TYPE 2: Network Password Setup Enable/Disable password checking. Values: On/Off (Default) Administrator account/password can not be blank. And at least 4 characters for the password. Administrator account/password Administrator account allows user to access all of functions.
8.7.6 8.7.7 System Language Language Values: Traditional Chinese and English. Auto rebooting after change. Function Tip Show function tips below the menu items. Value: On/Off (Default). Audio Setting Audio Volume Set the volume of audio In/Out. Values: 1-10.
8.7.8 System Maintenance Auto maintenance: Set time for auto rebooting. Value: On/Off. Auto rebooting setting F/W update Please plug the USB memory stick into the USB port on the DVR rear panel after download the new firmware to the USB memory stick. Note: the firmware only can be upgraded by using the USB port. Please don’t operate the system, remove the USB memory stick or remove the power while it is in upgrade progressing in order to prevent any serious system error.
9. H264 Player Operation Preface H264 Player software allows to playback the backup saving file from the DVR. System Requirement Operating System: Windows 2000, XP, Vista, Windows 7. Program obtainment and installation While user start to backup the file from DVR, the system will automatically copy the H264Player.exe file and recorded data to the backup device for example, an USB flash memory stick.
Step 3: Select Additional Tasks Step4: Install Confirmation Step 5: Installation Complete 25
User Interface Open File Click Pause Click Stop Click Play 1x Click Fast Forward Click Slow Forward Click Capture the image (snap shot) to the host computer Click Volume Control Drag Rewind Click Step Forward Click Mark start time Click Mark end time Click Backup Click Right click the mouse to open the Pop-up Menu pop-up menu including Setting, Language, About H264Player, Exit 26
10. Cell Phone Monitoring Operation (TYPE 2) JAVA Script surveillance: 1. The mobile Phone must support JAVA Script. 2. To download the JAVA software: open Internet Browser on the mobile phone, and enter the IP address of the DVR and add /viewer.jar at the end. Example: http://xx.xxx.xxx/viewer.jar. 3. Execute the application. 4. Click on “Add” on the drop down menu to add an IP address. 5. Enter the IP address, user name and the password of the DVR and click on “Save”. 6.
■ Android Software install/setup procedure Before the installation, please check the ”Allow Non-market application” or “unknown source” checkbox in your mobile phone< PIC 1~2>. < PIC 2> First method 1. First, please make sure the PC synchronize software had installed and activated in your Android mobile phone. And connect your android phone to PC via USB. 2. Install “Castillo player” software player to the Android phone through your synchronize software.
Method two You may copy the APK installation package to your mobile phone or memory card, and then install it through other software. 1. Copy the “Castillo player” software package to your mobile phone through USB or directly to SD memory card. 2. Download the free APK installation software from Market, for example APKinstallerc or AppInstaller, here we use AppInstaller for example.
3. Run the AppInstaller program, install the APK software package from your SD memory card. 4. After the installation, you may find the “Castillo Player” in your program list, click it to run the program.
5. Press the “Setup” button to setup the connection setting . Enter your individual configuration. 6. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting.
7. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established. 8.
■ iPhone software install/setup procedure 1. Download the “Castillo player” in AppStore then install it to your IPhone.
2. Run the “Castillo Player” after installation. Press “setup” button to setup the connection setting. Enter your individual configuration then press “back” button to go back to the main screen. 3. Press “Play” button, then you may see the DVR live view picture after the connection established .
4.
■ Symbian Software install/setup procedure 1. Copy the Symbian player to your mobile phone or memory card; you may see the example below in the case of NOKIA. 2. Connect the mobile phone to PC via USB, copy the live view software to the memory card of your mobile phone .
3. Before the installation, please make sure you had cancel the “Only Signed Application”, also cancel the “Connection credentials check” .
4. Enter the folder which you’d saved the live view software “fuho_20110221.sisx”, double click to install, follow the instruction to proceed .
5. After the installation, enter the “Installed Application” and you may see the “Castillo Player” inside .
6. Click and run the Castillo Player program . 7. Press the “Setup” button to setup the connection setting. After setting complete, click the “Add to my favorite” button to save the setting. Press “Connect” button, it’ll connect to the DVR according to your setup .
8.
■ Windows Mobile Software install/setup procedure 1. Please install “Microsoft ActiveSync” into the PC before installing CAB software. 2. Execute the Microsoft ActiveSync program in your PC first, and connect the Windows Mobile SmartPhone to PC via USB, then it’ll synchronize the SmartPhone and PC. 3. In ActiveSync program, Click “Browse” button to open the mobile device folder . 4. Copy the .
5. Please disconnect the SmartPhone from your PC, and begin the installation below: 6. Execute the Castillo Player CAB install package from the File browser, you may find it in your mobile device folder . 7. Double click and it’ll begin the installation, follow the instruction for setting up. After the installation, you may find the “Castillo Player” in your program .
8. Run the Castillo Player program, press the “Setup” button to setup the connection setting. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting. Press OK and Leave to go back to the main screen .
9. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established .
10.
1. Blackberry Software Connect Procedure Blackberry RTSP Connect procedure: Verify Authentication, website address input format as below rtsp://(website address)/ch(channel number)?user=(user ID)&pwd=(user password) e.g. rtsp://f16.cctvdvr.com.tw:554/ch2?user=2222&pwd=2222 2.
Operation System For Mobile Phone Application O/S Version Android 2.1、2.2、2.3 iPhone 3.x、4.x Castillo player WinMobile 6.5.x CastilloPlayer_5.0.3.CAB Symbian S60 v3 above CastilloPlayer_5.1.713.sisx BlackBerry Mobile Phone Software CastilloPlayer(Android_1.5~2.1).apk CastilloPlayer(Android_2.2~2.3).apk Support RTSP None Protocol 11. Web Operation (TYPE 2) Preface The Web Application Manager allows the user to remotely monitoring, playback, backup through the DVR.
User Interface Login Page Please login user name and password from the setting of DVR end.
Playback (1) Select Date Event Search or (2)Click (3)Click Playback Click on pop up file list Fast Forward Click “Fast Forward” (Speed: 2X, 4X, 8X, 16X) Rewind Click “ Rewind” (Speed: 1/2, 1/ 4X, 1/ 8X, 1/ 16X) Step Forward Click “Previous”or “Step” Snapshot Click Mark start time Click Mark end time Click Backup Click Backup to capture.
DVR Setting Cameras Please refer “Camera Setup” for more information Record Please refer “Record Setup” for more information. MotionDetection Please refer “Motion Detection” for more information.
Network setting E-MAIL Log search 52
System Setting Date/Time Setting HDD Management Display 53
System Information Account / password Audio Setting 54
System Maintenance Host setting 55
12.
57
