User`s manual

12
6.2 setting of cameras
6.2.1 Click on setting button to enter into the interface of setup. click on
，you may turn on the different channels and set up the IP
address/corresponding network port/user name and password(if the setup and
network are no problem, camera will display on the corresponding channel)click on
to apply. As the following figure：
6.2.1.1
If the user needs to revise the parameters of network camera (resolution, FPS,IP
parameters and camera name., etc), please choose to enter the setup of
parameters. You may revise the resolution of main stream, FPS and bit rate, etc. as the
following figure: