User manual

5
Chapter 3 【Hard Drive Installation】
Please install at least one hard drive before starting record video.
1. Power off the NVR
2. Insert the removable HDD tray to the removable HDD slot and close the HDD
panel.
3. Lock up the HDD panel to prevent unauthorized removal of HDD.
4. For the use of large-capacity storage space (E-SATA), connect an E-SATA disk array
to E-SATA input located on the back panel.
Chapter 4 【Hardware Installation】
1. Connect network cameras to a network switch with network cables. CAT6
network cable or better is highly recommended.
When connect network switch to the NVR, make sure the network LED indicator is
lid up. (The network connection of the NVR is designed to be used with dedicated
IP connectivity. (For general internet setup and knowledge, please refer to
network setup).
2. For usage of the DC 12V power adaptor and cable, please refer to diagram of the
rear panel.
3. The NVR will power up and display live viewing automatically when power is
connected. Please refer to live viewing for more info.