EN CONTENTS SAFETY INSTRUCTIONS CAUTION PACKAGE CONTENTS PRODUCT DIAGRAM GETTING STARTED 1. Charging & Powering Baby Monitor 2. Powering Camera 3. Pairing the Baby Monitor & the Camera 4. Placing the Camera 5. Wall Mounting Camera 6. Wide-Angle Lens (Optional) FUNCTIONS & OPERATIONS Monitor Interface Overview 1. Volume Adjustment 2. Display Brightness Adjustment 3. Talkback 4. Monitor Settings 5. Add / View / Delete a Camera 6. Digital Zoom & Circulating 7. Pan-n-Tilt 8. Night Vision 9. Alarm 10.
PRODUCT DIAGRAM Camera Baby Monitor 1 2 8 1 4 5 2 6 MENU 7 ZOOM AUTO-PILOT / OK TALK 8 9 10 11 12 13 3 3 4 5 6 7 14 15 16 17 18 1 2 3 4 5 6 7 8 9 03 Antenna Volume Indicators Microphone Charging Indicator Power Indicator Menu Button Zoom Button Left Button Up Button 10 11 12 13 14 15 16 17 18 Right Button OK Button Down Button Talk / Shortcut Button Power Button Upgrade Pinholes Back Stand Speaker USB-C Port 9 1 2 3 4 5 Camera Vents Camera Antenna Micro-USB Port Temperature Sen
GETTING STARTED 4. Placing the Camera 1. Charging & Powering Baby Monitor Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason and for a better view when in night vision mode. 1) Connect the monitor adapter to the monitor and a power outlet. 2) Unplug the unit when its power indicator turns off, indicating a full charge. 3) Press the Power button on the monitor to power on with the power indicator lighting green. 1 .52m / 4.9 -6.6 ft 2.
. Wide-Angle Lens (Optional) The aluminum lens hood (no special video effects) has been installed when the camera was manufactured. To install wide-angle lens (sold separately), simply rotate the original lens hood counterclockwise to remove. Then install the new lens and rotate clockwise to fix in place.
Bottom Menu Brief 2. Display Brightness Adjustment Add Camera Max.
· To mute the sound during poor monitor-camera connection, please set the system sound volume to mute. · When the monitor screen is under sleep mode, the power indicator flashes green slowly while the audio is still on; press any button to awake. You can also short press the Power Button to turn the screen off. · Press and hold the Power Button to power on / off the monitor. 7.
TROUBLESHOOTING Product not powering on? · Check that the camera and monitor are turned on. · Check the camera is connected to power properly (it cannot be charged; it’s power off once disconnected from power). · Check that the monitor is of enough battery (it’ll auto shut off when battery level icon flashes red slowly on the monitor). · Check the intactness of the power cable. · Check whether the camera is near the monitor (recommended to keep within 1.5-2m / 4.9-6.6ft).
