Operation Manual

exact time you pass them. The difference between the two points of time will be used
to calculate your average speed.
V7 Navigation will warn you when you approach one of these cameras, but as you
pass by, the warning stays on, and your average speed is measured until you reach
another camera of this type. If your average speed exceeds the speed limit between
the two cameras, you will receive the same special warning sound as with the other
camera types.
Note: In the rare case V7 Navigation cannot register the moment you pass the
second camera (e.g. it is placed at the exit of a tunnel where GPS position is not yet
available) the warning will continue. Just tap the camera symbol displayed on the
screen to stop the warning.
These cameras are displayed with the following symbol:
4.7.1.5 Red light cameras
These cameras check if you obey traffic lights or not. The warning is similar to fixed
cameras, but as there is no speed limit given, only the proximity is announced.
These cameras are displayed with the following symbol:
4.7.2 Controlled traffic direction
The different cameras can measure the speed of one direction of the traffic, both
directions, or even several directions in an intersection, when they are mounted on a
rotating base. V7 Navigation warns you only if you drive in a measured or possibly
measured direction.
The measured direction of the cameras is displayed with the following symbols:
47