Operation Manual

• Maneuver: this option avoids the highlighted action. For example if you find a turn
too difficult during rush hour traffic, V7 Navigation will recalculate the route
excluding that turn. If the next street is important in the route, it is likely that V7
Navigation will replace the turn with several easier ones to get to the same street.
• Road: when you exclude a road, V7 Navigation will calculate a route that does not
use that road. It is useful when you anticipate a traffic jam in a street used in your
route, or a roadblock is announced on the radio, and you find that road in your
Itinerary.
• Distances: you can also find some distance buttons in this list. They are similar to
the ones in the Detour list of the Route Manager menu (Page 38), but these can
also be used for distant parts of the route.
Note: You need not open Itinerary if you run into a roadblock or traffic jam. To get an
immediate alternative route use the Detour function of the Route Manager (Page ). 38
Note: When you use this feature, V7 Navigation will keep on excluding the same part
of the map from later routes until you manually delete the route (Page ), or restart 38
V7 Navigation.
4.5.2.7 Route Info
This button opens the Route Information screen described here: Page . This
screen shows information about the current route and has a few additional options to
check and modify your active route.
34
4.5.2.8 Route parameter settings
This is a very important page. Settings here determine how routes will be calculated.
This screen is directly accessible from the Route Information screen (Page ). 34
41