Operation Manual

4.4.1.2 Time Left
This is an estimated value that is also displayed in one of the Route data fields on
the map screen as ‘Time to arrive’. It shows the time needed to reach the final
destination of the route based on information available for the remaining segments of
the route. The calculation cannot take into account traffic jams and other possible
delays.
4.4.1.3 Estimated Arrival
This is an estimated value that is also displayed in one of the Route data fields on
the map screen as ‘ETA to destination’. It shows the estimated arrival time at the
final destination of the route based on information available for the remaining
segments of the route. The calculation cannot take into account traffic jams and
other possible delays.
4.4.1.4 Method
This field shows how the route was calculated. It either displays the ‘Route’ or the
‘Vehicle’ field from the Route parameter settings. If you have chosen Car, Taxi, Bus
or Truck, the type of the route (Fast, Short or Economical) will be displayed here; if
you have selected Emergency, Bicycle or Pedestrian, this information will be
displayed here.
4.4.1.5 Destination
This field shows the exact address (or its coordinates if the address is not available)
of the final destination.
4.4.2 Warning icons
The following 5 squares are normally gray. Some of them turn red and show a
graphical symbol in case warning(s) are attached to the planned route. These are
warnings, so icons always show information for the whole route, even if the data
fields display values from your current position to a via point only.
Click on any of the icons to show its description.
A few samples of the available icons:
• This icon shows that you need to pay toll on the recommended route.
•
This icon shows that the route contains motorways. Tap the icon to see the
total length of the motorways in the recommended route.
•
This icon shows that toll roads are included in the recommended route.
35