Operation Manual

multi-point route in reverse order (when you wish to insert a stopover ‘go to A but

first get some fuel at B’ or want to influence the direction of the route). This menu

point works only if a route is already active.

• Remove Via: removes the ‘via point’ near or at the Cursor. The route will be

recalculated immediately excluding the deleted point. This menu point replaces

Add Via and is available only if the Cursor is near or at a via point.

• Continue: add a new destination to be reached after the previous destination. The

new destination replaces the old one, which is now demoted to a via point. This is

the way to build your multi-point route in straight order (when you wish to visit

several destinations ‘go to A then to B’). This menu point is available only if a

route is already active.

• POI: opens the list of POIs near the selected point. These are the POIs shown in

the Popup Info window. If you want to add a new Favorite at the cursor, you can

do so by tapping Add POI in the bottom left corner. You can also add a new road

safety camera if you tap Add Cam, and set the parameters (type, direction, and

speed). If a camera already exists near the cursor, this button is inactive, and you

can change the parameters of the camera by tapping it in the list.

4.3.13 Travel and Route data - Next street/settlement (No. 14)

The contents of these three fields are different when cruising (without an active

route) or navigating (following an active route).

While cruising, the fields show the present speed, the current speed limit and the

time of day.

While navigating a route, these fields show the Distance to Destination, the

estimated time needed to reach the destination (Time to Arrive), and the estimated

arrival time at the destination (ETA to Dest.).

Tap any of these fields, and the display will switch to show the name or number (as

available) of the current street or road you are driving on for a few seconds. Soon the

data fields will return automatically.

Tip: Some roads have an alternative name (or number). This is normally shown

together with the primary name in this field. You can hide these alternative names in

Map settings (Page ). 52