Operation Manual

Page ), just mutes the sound output. When muting is enabled, the speaker icon is
crossed out.
53
Tap again to re-enable sounds.
Note: Sound can be muted in Sound settings (Page ), too. There you have a 53
Master switch that works together with the switch described above. There is also a
Master slider on that screen. That you can use to fully turn down the volume of the
device. Setting the volume low is different from muting, therefore it will not show up
on the mute indicator.
4.3.10 Bluetooth or Phone call status (No. 11)
When Bluetooth is turned off, a gray telephone icon is displayed here.
Tap the icon to turn on the Bluetooth radio. When Bluetooth is on, the icon turns
blue.
If you tap the icon when it is blue, V7 Navigation pauses, and the phone dialer
screens of the device appears.
During a phone call using the NAV700 as a handsfree tool for your mobile phone V7
Navigation is paused, and you see the phone call screen. You can continue
navigation without stopping the phone call if you tap the button that leads back to the
map screen. Then navigation continues without voice guidance (sound is reserved
for the phone call), and an icon depicting a telephone handset is shown here.
Tap the icon to pause V7 Navigation, and return to the phone call screen.
When you hang up the call, the icon returns to the blue Bluetooth logo.
4.3.11 Track Log recording/playback indicator (No. 12)
When a track log is being recorded, a red icon is displayed on the map screen.
31