Quick Start Guide

ManualsBrandsV7 videoseven ManualsVehicleNAV 740

Function keys and I/O interfaces:

Ref Component Description

1) SD/MMC Slot Accepts an optional SD (Secure Digital) or MMC (MultiMedia Card) card for removable storage.

2) Volume key Turns the volume up/down.

3) Battery Charge

Indicator

The loading display will shine red during the charging process. It will shine green when the battery

is completely charged.

4) Touch Screen Displays the output of your appliance. Tap on the screen with your finger to select menu commands

or enter data.

6) Reset button Restarts your appliance. (Reset).

7) Headphone connector

Connects to stereo headphones.

8) Mini-USB- Connector

Connection for connecting power charge.

5) On/Off Button Turns the device on or off.

9) Main switch/

Battery switch

For battery charge.

10) External antenna

connector

Connector for an optional external GPS antennal.

11) Loudspeaker Plays back music, language statements and warnings.

3 4

GPS NAVIGATION NAV740

Quick Start Guide

Summary of content (6 pages)

PAGE 1
GPS NAVIGATION NAV740 Quick Start Guide Function keys and I/O interfaces: 2 3 4 5 10 6 7 8 9 1 11 Ref Component Description 1) SD/MMC Slot 2) Volume key 3) Battery Charge Indicator 4) Touch Screen Accepts an optional SD (Secure Digital) or MMC (MultiMedia Card) card for removable storage. Turns the volume up/down. The loading display will shine red during the charging process. It will shine green when the battery is completely charged. Displays the output of your appliance.
PAGE 2
Initial Set up: 1.Switching on the navigation system Remove the protective plastic from the screen and ensure the main power switch on the buttom side of the unit is in the ON position. ! Attention: Always leave the main switch in the ON position. The switch should only be set in the OFF position to preserve battery charge if the unit is to be stored for an extended period of time. Note:Some settings will be reset. 2.
PAGE 3
Initial setup Languages Set Date Set Time Mainpage V7 Navigation The Map When the V7 Navigation first starts, the Map screen appears. From here you can reach all three tabs of the V7 Navigation menu by tapping the button. On the tab, you can specify your destination as an Address, a POI (Point of Interest), or by its GPS Coordinates. You may also select a destination from Favorites, or one of your recently visited destinations from the History list. Tap to edit or cancel your route.
PAGE 4
From the list of matching streets: Tap a listed search result to select that street, Or, tap to show only the streets containing a given house number, Use the buttons to see additional results. After the city and street are selected, you may now enter the house number. The range of available house numbers will be displayed. Tap to select a cross street, or Use the keyboard to enter the house number, and tap when finished. You have now finished setting the destination.
PAGE 5
Using the selected map point Whenever you select a point on the map, you can open the cursor menu to set up or manage routes. To open the cursor menu, tap : Tap to replace the previous destination with this point. To add this point as a stop along your route, tap Tap to add the point to the end of the route. . to see the list of nearby POIs, then tap Tap to save this point as a new POI. To save this point as a location of a road safety camera, tap .
PAGE 6
Settings The Settings menu lets you fine-tune the way your V7 Navigation works. Tap to set the general parameters, like Speed Warning Options or Night Mode. Tap to adjust keypad tones and voice guidance settings, Tap to reach the TMC (Traffic Messaging Channel) Control Center to setup Real-Time traffic (where available), Tap to manage which POIs will display on the map, Tap to set the language of text and voice prompts, or units of measurement. Tap to stop or suspend the V7 navigation.